Contact your Tampa FL Cabinet Installation Expert in the Tampa, FL area

Cabinet Installation Selection - Tampa FL - A Wide Range of Luxury Cabinets

Kitchen and Bath Cabinet Installation Selections Tampa, FL

We have a large cabinet installation selection for your Tampa, FL area home. Carefully selecting a cabinet design can enhance your kitchen or bath experience and give you added value. However, choosing the right cabinet that meets your home decor and your personal taste is not always an easy task. That is why we offer a variety of cabinet products. If you need assistance, we can help you throughout the selection process. Together, we will achieve the exact look and feel for your kitchen or bath.

Go to the Contact Us Page to receive more information regarding cabinet installation in your Tampa, FL area home.

Click on the logos below for additional, brand specific information.
The cases are traditional face frame construction using select birch. Face frames are solid 3/4” thick with 1 1/2” stiles and rails. Mortise and tenon joints. The sides are birch veneered 1/2” plywood. The interior features a clear-coat finish and the exterior is stained to match the door. Shelves are 5/8” thick birch veneered plywood sealed with a clear-coat, adjustable and front edge banded. Backs are framed with a 1/2” plywood. Drawers are 1/2” thick solid hard wood, dovetailed joints and clear-coated. Bottoms are 1/4” birch plywood fully captured. Slides are under mounted full-extension soft close. Doors have full overlay door styles. Butt doors 39” wide. Mortise and Tenon with 6-way adjustable hinges. All cabinets are finished with Valspar standard formulations. Catalyzed conversion varnish coat with UV protection is applied to doors, drawers and frames.
DCC produces all of our Doors and Wood Mouldings at our factory in Rockledge, Florida.  Wood products represent over 85% of our total volume with Thermofoil and Melamine products making up the additional 15%. We buy the majority of our hardwoods from 2 main suppliers located in the northeastern part of the country.  All of our lumber is purchased in rough form where it is then planed, cut and moulded into doors, rails, center panels and other types of profiles.  We buy only FAS or Select material in Maple, Oak, Cherry and Poplar species.  All door rails and center panels are assembled using either mitered or mortise and tenon type construction.  The completed doors and fronts are then machine sanded followed by detailed prep sanding by a qualified employee using orbital sanders.  The door, drawer or  other wood components are then stained and sealed in an automated finishing line. 
click to view catalog The cabinet box are all plywood box construction. The cabinet Sides are made of 1/2" plywood. The back panels are full cabinet height, and are 3/8" plywood. The cabinet tops and bottoms, as well as, the base braces are 1/2" captured 4 sides plywood. The shelves are made up of 3/4" plywood and are full depth. The drawer box are full depth dovetailed 5/8" hardwood. The glides are steel with a concealed full extension. The Hinges for a full overlay door are 6-way adjustable for easy use and are concealed. The door styles are full overlay or inset doors styles. It all comes with a Lifetime Limited warranty.
You have the option of having some of the finest cabinets available. In addition to their styles and colors, and species of cabinets, you can choose from many construction options as well. In addition, they offer some of the best UV protection option on the market. They offer 1/2" plywood rails, concealed 110 degree opening with their 6 way adjustable cam hinges, 12mm UV protection, and 18mm birch plywood shelves. You can also choose to have dovetail drawers for superior durablity, and all cabinets come with their high impact plastic corner bracing.